Copy of Final LED Power

---------------------------------DRONE PROJECT SIMULATION----------------------- This is a simulation with 1 LED module and the primary controller used for resetting the cycle of LED flashes. Even though there are 9 LED modules connected in paralell to each other, the current through the main wires(the ones that are connected to the 12V power supply from the drone) should be the same as only ONE LED module flashes at one point of time. Therefore, the current through the main wire will be the same even with 9 LEDs. ------------------------------------------------------------------------------------------------- Short Description on the Components used: 12V Power Supply: 12 V that would be supplied from the Drone Microcontroller Output: The ATtiny85 outputs 5V. Primary Microcontroller Output: The primary controller ATtiny85 outputs 5V. ZTX688B: This is the power transistor we are using. Please look at the SPICE Models.txt for more information. LED: Each LED module will have 4 LEDs which will ensure 360 degree visibility. The model of the LED is XPGDWT-01-0000-00M50. Please look at the SPICE Models.txt for more information.